DTC U0328-82: Error Signal Received From Steering Angle Sensor (BCM): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC U0328:82 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from steering angle sensor
Detection condition	The body control module (BCM) received CAN error signal from the steering angle sensor.
Fail-safe	Not applicable
Possible cause	Steering angle sensor malfunction Body control module (BCM) malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable