Residual Unbalance Amount Verification
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- After installing the balance weights on the outer and inner sides, measure the wheel balance again.
STANDARD WHEEL BALANCE SPECIFICATION
| Outer side (adhesive type) | Inner side (knock type) | |
|---|---|---|
| 16 inch wheel | 14 {0.49} max. | 9 {0.3} max. |
| 18 inch wheel | 12 {0.42} max. | 8 {0.3} max. |
- If not within the specification, adjust the wheel balance again.