LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical System (VIN L)) >> Engine Mount Disassembly/Assembly >> No. 1 engine mount installation note (AWD)

No. 1 engine mount installation note (AWD)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the No. 1 engine mount bracket installation bolts in the order shown in the illustration.
    Fig 1: No. 1 Engine Mount Bracket Bolts Tightening Sequence (AWD)
    G13556442Courtesy of MAZDA MOTORS CORP.
  2. Temporarily tighten the No. 1 engine mount rubber installation bolts in the order shown in the illustration.
    Fig 2: No. 1 Engine Mount Rubber Bolts Tightening Sequence (AWD)
    G13556443Courtesy of MAZDA MOTORS CORP.
  3. Tighten the No. 1 engine mount rubber installation bolts in the order shown in the illustration.
    Fig 3: No. 1 Engine Mount Rubber Bolts Tightening Sequence (AWD)
    G13556444Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals