LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical System (VIN L)) >> Engine Disassembly/Assembly >> Oil Cooler Water Pipe Component Installation Note (SKYACTIV-G 2.0)

Oil Cooler Water Pipe Component Installation Note (SKYACTIV-G 2.0)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler water pipe component in the order shown in the illustration.
    Fig 1: Oil Cooler Water Pipe Components Bolts Tightening Sequence
    G13556431Courtesy of MAZDA MOTORS CORP.