LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Rear Differential) >> Rear Differential Mount Rubber Removal/Installation >> Rear Differential Mount Rubber (Rear) >> Stud Bolt, Washer, And Nut Installation Note

Stud Bolt, Washer, And Nut Installation Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily tighten the stud bolt, washer and nut.
  2. Remove the transmission jack.
  3. Shake the rear differential forward and back/left and right to improve the installation fit of the rear differential.
  4. Tighten the stud bolt and nut completely.
scientia non olet · About LEMON Manuals