LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (On-Board Diagnostic - Manual A/C) >> PID/Data Monitor Table (Manual A/C)

PID/Data Monitor Table (Manual A/C)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

-: Not applicable

PID/DATA MONITOR REFERENCE (MANUAL A/C)

PID/data monitor item Unit/Operation Data contents Module control terminal
A/C_CTRL_STAT OFF/AC
  • OFF: A/C compressor control is off
  • AC: A/C compressor control is on
 -
A/C_MAX_SW OFF/ON
  • OFF: Temperature control dial is not rotated to maximum left
  • ON: Temperature control dial is rotated to maximum left
 -
A/C_MODE_BILVL_SW OFF/ON
  • OFF: Mode switch (BILEVEL) is not pressed
  • ON: Mode switch (BILEVEL) is pressed
 -
A/C_MODE_CTRL_STAT Vent/B/L/HEAT/H/D/DEF
  • Vent: Airflow mode setting is in VENT
  • B/L: Airflow mode setting is in BI-LEVEL
  • HEAT: Airflow mode setting is in HEAT
  • H/D: Airflow mode setting is in DEF/HEAT
  • DEF: Airflow mode setting is in DEFROSTER
 -
A/C_MODE_FLOOR_DEF_SW OFF/ON
  • OFF: Mode switch (DEF/HEAT) is not pressed
  • ON: Mode switch (DEF/HEAT) is pressed
 -
A/C_MODE_FLOOR_SW OFF/ON
  • OFF: Mode switch (HEAT) is not pressed
  • ON: Mode switch (HEAT) is pressed
 -
A/C_MODE_PNL_SW OFF/ON
  • OFF: Mode switch (VENT) is not pressed
  • ON: Mode switch (VENT) is pressed
 -
A/C_SW OFF/ON
  • OFF: A/C switch is off
  • ON: A/C switch is on
 -
CLIMATE_STAT Stopped/IP-ESU Indicator all ON Control/Indicator all ON Mode
  • Stopped: All of the indicators and switch back lights on climate control unit are turned off
  • IP-ESU Indicator all ON Control: All of the indicators and switch back lights on climate control unit are turned on
  • Indicator all ON Mode: While in all indicators on mode
 -
DEF_SW OFF/ON
  • OFF: DEFROSTER switch is off
  • ON: DEFROSTER switch is on
 -
FAN_CTRL_STAT FAN OFF/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
  • FAN OFF: Blower motor is stopped
  • Manual 1: Blower motor is operating in manual 1
  • Manual 2: Blower motor is operating in manual 2
  • Manual 3: Blower motor is operating in manual 3
  • Manual 4: Blower motor is operating in manual 4
  • Manual 5: Blower motor is operating in manual 5
  • Manual 6: Blower motor is operating in manual 6
  • Manual 7: Blower motor is operating in manual 7
 -
FAN_DIAL_POS FAN OFF/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
  • FAN OFF: Airflow volume control dial is stopped at fan stop position
  • Manual 1: Airflow volume control dial is stopped at manual 1 position
  • Manual 2: Airflow volume control dial is stopped at manual 2 position
  • Manual 3: Airflow volume control dial is stopped at manual 3 position
  • Manual 4: Airflow volume control dial is stopped at manual 4 position
  • Manual 5: Airflow volume control dial is stopped at manual 5 position
  • Manual 6: Airflow volume control dial is stopped at manual 6 position
  • Manual 7: Airflow volume control dial is stopped at manual 7 position
 -
FAN_DIAL_VAL_A/D LSB Displays the A/D converted value of the airflow volume control dial. -
GLOVE_BOX_LAMP_CTRL OFF/ON
NOTE:
  • Displays in the M-MDS but it does not operate.
 -
HZRD_CTRL_STAT OFF/ON
  • OFF: Hazard system is not operating
  • ON: Hazard system is operating
 -
HZRD_SW OFF/ON
  • OFF: Hazard warning switch is off
  • ON: Hazard warning switch is on
 -
INTAKE_CTRL_STAT REC/FRESH
  • REC: Air intake control setting is in REC
  • FRESH: Air intake control setting is in FRESH
 -
R_DEF_CTRL_STAT OFF/ON
  • OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)
  • ON: Rear window defogger switch indicator is turned on (rear window defogger operating)
 -
R_DEF_SW OFF/ON
  • OFF: Rear window defogger switch is off
  • ON: Rear window defogger switch is on
 -
REC_SW OFF/ON
  • OFF: RECIRCULATE switch is off
  • ON: RECIRCULATE switch is on
 -
SEAT_HEAT_STAT_L OFF/Lo/Mid/Hi
  • OFF: Seat warmer switch (LH) indicator is turned off
  • Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1
  • Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2
  • Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3
 -
SEAT_HEAT_STAT_R OFF/Lo/Mid/Hi
  • OFF: Seat warmer switch (RH) indicator is turned off
  • Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1
  • Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2
  • Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3
 -
SEAT_HEAT_SW_L OFF/ON
  • OFF: Seat warmer switch (LH) is off
  • ON: Seat warmer switch (LH) is on
 -
SEAT_HEAT_SW_R OFF/ON
  • OFF: Seat warmer switch (RH) is off
  • ON: Seat warmer switch (RH) is on
 -
STR_HEAT_STAT OFF/Lo
  • OFF: Steering warmer switch indicator is turned off
  • Lo: Steering warmer switch indicator is turned on
 -
STR_HEAT_SW OFF/ON
  • OFF: Heated steering wheel switch is off
  • ON: Heated steering wheel switch is on
 -
TEMP_DIAL_POS - Displays the position of the temperature control dial. -
TEMP_DIAL_VAL_A/D LSB Displays the A/D converted value of the temperature control dial. -
VOLT_5V V Displays the voltage for the 5 V power supply of the circuit in the climate control unit. -
VPWR V Displays the power supply voltage (B+) to the climate control unit. -
scientia non olet · About LEMON Manuals