Fail-safe Function Table
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
FAIL-SAFE FUNCTION DESCRIPTION
| DTC | Fail-safe control status | ||
|---|---|---|---|
| C200B:17 | Control enabled by the other torque sensor (1) | ||
| C200B:1C | Control enabled by the other torque sensor (1) | ||
| C200B:29 | Control enabled by the other torque sensor (1) | ||
| C200B:62 | Control enabled by the other torque sensor (1) | ||
| C200B:64 | Control enabled by the other torque sensor (1) | ||
| C200B:83 | Control enabled by the other torque sensor (1) | ||
| C200C:17 | Control enabled by the other torque sensor (1) | ||
| C200C:1C | Control enabled by the other torque sensor (1) | ||
| C200C:29 | Control enabled by the other torque sensor (1) | ||
| C200C:62 | Control enabled by the other torque sensor (1) | ||
| C200C:64 | Control enabled by the other torque sensor (1) | ||
| C200C:83 | Control enabled by the other torque sensor (1) | ||
| C200D:1C | Control is maintained in the backup control (1) | ||
| C200D:64 | Control is maintained in the backup control (1) | ||
| U0001:88 | Control enabled (1) | ||
| U0100:00 | Control enabled | ||
| U0121:00 | Control enabled (1) | ||
| U0140:00 | Control enabled | ||
| U0401:00 | Control enabled | ||
| U0415:00 | Control enabled (1) | ||
| U0428:00 | Control enabled | ||
| U0428:83 | Control enabled | ||
| U2011:17 | Control disabled | ||
| U2011:19 | Control disabled | ||
| U2011:1C | Control disabled | ||
| U2011:62 | Control disabled | ||
| U2011:64 | Control disabled | ||
| U2011:72 | Control is maintained in the backup control (1) | ||
| U2011:92 | Control disabled | ||
| U2121:00 | Control enabled (1) | ||
| U2300:54 | Control enabled | ||
| U2300:55 | Control enabled | ||
| U2300:56 | Control enabled | ||
| U2501:00 | Control enabled (1) | ||
| U2501:83 | Control enabled (1) | ||
| U3000:16 | Control disabled | ||
| U3000:28 | Control is maintained in the backup control (1) | ||
| U3000:49 | Control disabled | ||
| U3000:4B | Control enabled (1) | ||
| U3000:61 | Control disabled | ||
| U3000:64 | Control disabled (Control may be permitted depending on malfunction content) | ||
| U3000:72 | Control disabled | ||
| U3000:73 | Control disabled | ||
| U3000:96 | Control disabled | ||
| U3003:16 | Control is maintained by gradually decreasing the motor control current However, control is inhibited if the power supply voltage is the specified value of less |
||
| U3003:17 | Control disabled | ||
| U3003:1C | Control disabled | ||
| U3006:16 | Control enabled | ||
|
|||