DTC P160A-00: Configuration Data Unmatched With Body Control Module (BCM) (Airbag) (Us): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC P160A:00 [SAS CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration data unmatched with body control module (BCM)
Detection condition	The configuration information for the steering wheel position between the SAS control module and the body control module (BCM) does not match.
Fail-safe	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module configuration setting invalid Body control module (BCM) configuration information for the steering wheel position setting not implemented Body control module (BCM) configuration information for the steering wheel position setting invalid SAS control module malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable