DTC B1011-95: SAS Control Module Connectors Are Poorly Connected (Airbag) (Us): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC B1011:95 (AIRBAG) (US) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module connectors are poorly connected
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. No continuity between poorly connected detector bar terminals of the SAS control module, or the measurement value is out of the normal range even though there is continuity
Fail-safe	Not applicable
Possible cause	SAS control module connectors are poorly connected SAS control module connector malfunction SAS control module malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable