DTC B00A0-4A: Seat Weight Sensor Control Module Id Mismatch (Airbag) (Us): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC B00A0:4A (AIRBAG) (US) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Seat weight sensor control module ID mismatch
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. The vehicle ID stored by the SAS control module and the vehicle ID received from the seat weight sensor control module do not match.
Fail-safe	Not applicable
Possible cause	Seat weight sensor configuration setting has not been done correctly Seat weight sensor configuration setting invalid Seat weight sensor control module malfunction SAS control module malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable