DTC B0003-53: Operation (Deployment) Inhibited (Airbag) (Us): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC B0003:53 (AIRBAG) (US) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Operation (deployment) inhibited
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. The SAS control module configuration has not been set SAS control module configuration setting has not been done correctly The SAS control module configuration has been set, but air bag system is not normal
Fail-safe	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module configuration error Air bag system malfunction SAS control module malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable