LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Electric Power Steering System) >> Steering Wheel And Column Removal/Installation (Us) >> Steering Column Component Removal Note

Steering Column Component Removal Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always lock the adjuster lever. Otherwise, the steering column component could be damaged. In addition, do not release the lock of the adjuster lever until the steering column component installation is completed.
  • When removing the steering column component, follow the procedure. Otherwise, it could damage the intermediate shaft.
  1. Lock the adjuster lever.
    G13558974Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the steering gear (pinion) and intermediate shaft as shown in the illustration.
    G13558975Courtesy of MAZDA MOTORS CORP.
  3. Remove the joint bolt.
  4. Disconnect the intermediate shaft from the steering gear (pinion).
  5. Remove the nuts, then remove the steering column component from the dashboard member.
scientia non olet · About LEMON Manuals