Parking light inspection
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove the front turn light/parking light. (See FRONT TURN LIGHT/PARKING LIGHT REMOVAL/INSTALLATION .)
- Apply battery voltage to parking light terminal A, and connect terminal C to ground.
- Verify that the LED illuminates.
- If the LED does not turn on, replace the cluster switch. (See FRONT TURN LIGHT/PARKING LIGHT REMOVAL/INSTALLATION .)