LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (On-Board Diagnostic - Engine Control System (1 Of 4)) >> DTC P0015-00: Hydraulic Variable Valve Timing Control System: Over-Retarded (VIN M) >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm up the engine to allow the engine coolant temperature to reach 80°C {176°F} or more.
  2. Shift to 2nd gear (MTX)/D position (ATX) and rapidly accelerate the vehicle to 50 km/h {31 mph}(to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to 2nd gear (MTX)/D position (ATX) and rapidly accelerate the vehicle to 50 km/h {31 mph}again.
scientia non olet · About LEMON Manuals