LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (On-Board Diagnostic - Engine Control System (1 Of 4)) >> DTC B10A2-00: Vehicle Collision >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition ON and leave for 5 s or more.
  2. Clear the DTC from the PCM memory using the M-MDS. (See CLEARING DTC .)
  3. After switching the ignition off, switch the ignition back ON and leave for 5 s or more.
  4. Using the M-MDS, display DTCs and verify that DTC U0151:00 is not displayed. (See DTC INSPECTION .)
scientia non olet · About LEMON Manuals