LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (On-Board Diagnostics - Dynamic Stability Control System (DSC)) >> DTC U3000-54: Electric Parking Brake Motor Gear Unit Position Learning Not Completed [DSC HU/Cm] >> Outline

DTC U3000-54: Electric Parking Brake Motor Gear Unit Position Learning Not Completed [DSC HU/Cm]: Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
System malfunction location Electric parking brake motor gear unit position learning not completed
Detection condition
  • After replacing the DSC HU/CM, it detects that the electric parking brake motor gear unit position learning was not implemented.
Fail-safe Refer to "DTC Table" and "Fail-safe Function Malfunction Contents Table". (See DTC TABLE [DSC HU/CM (US)] .)
Possible cause
CAUTION:
  • After replacing the DSC HU/CM, if the electric parking brake has never been operated/released, a DTC may be output. After replacing the DSC HU/CM, operate/release the electric parking brake and have the system learn the electric parking brake motor gear unit position.
  • DSC HU/CM internal malfunction
System wiring diagram Not applicable
Connector diagram Not applicable