LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (On-Board Diagnostics - Dynamic Stability Control System (DSC)) >> DTC U0422-68: Error Signal Received From Body Control Module (BCM) [DSC HU/Cm] >> Outline

DTC U0422-68: Error Signal Received From Body Control Module (BCM) [DSC HU/Cm]: Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
System malfunction location Error signal received from body control module (BCM)
Detection condition
  • The DSC HU/CM receives the error signal from the body control module (BCM) (CAN BUS No. 1).
Fail-safe Refer to "DTC Table" and "Fail-safe Function Malfunction Contents Table". (See DTC TABLE [DSC HU/CM (US)] .)
Possible cause
  • DTCs are stored in the body control module (BCM).
  • Body control module (BCM) malfunction
System wiring diagram Not applicable
Connector diagram Not applicable