Selector Cable (Selector Lever Side) Installation Note
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the selector lever is in the P position.
- Verify that the manual shaft is in the P position.
 Courtesy of MAZDA MOTORS CORP.
|
- Press in the lock piece in the direction of the arrow (1) shown in the illustration, press in the safety lock in the direction of the arrow (2) shown in the illustration, and lock it.
 Courtesy of MAZDA MOTORS CORP.
|