LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (On-Board Diagnostic - Auto A/C) >> PID/Data Monitor Table (Auto A/C) (Us)

PID/Data Monitor Table (Auto A/C) (Us)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

-: Not applicable

PID/DATA MONITOR REFERENCE (AUTO A/C) (US)

PID/data monitor item Unit/Operation Data contents Module control terminal
A/C_CTRL_STAT Auto/OFF/AC
  • Auto: A/C compressor control is in AUTO
  • OFF: A/C compressor control is off
  • AC: A/C compressor control is on
-
A/C_MODE_CTRL_STAT Auto/Vent/B/L/HEAT/H/D/DEF
  • Auto: Airflow mode setting is in AUTO
  • Vent: Airflow mode setting is in VENT
  • B/L: Airflow mode setting is in BI-LEVEL
  • HEAT: Airflow mode setting is in HEAT
  • H/D: Airflow mode setting is in DEF/HEAT
  • DEF: Airflow mode setting is in DEFROSTER
-
A/C_SW OFF/ON
  • OFF: A/C switch is off
  • ON: A/C switch is on
-
AMB_TEMP_INTERNAL °C, °F Displays the cabin temperature detected by the passenger compartment temperature sensor. -
AUTO_SW OFF/ON
  • OFF: AUTO switch is off
  • ON: AUTO switch is on
-
CLIMATE_STAT Stopped/IP-ESU Indicator all ON Control
  • Stopped: All of the indicators, display panel, and switch back lights on climate control unit are turned off
  • IP-ESU Indicator all ON Control: All of the indicators, display panel, and switch back lights on climate control unit are turned on
-
DEF_SW OFF/ON
  • OFF: DEFROSTER switch is off
  • ON: DEFROSTER switch is on
-
FAN_CTRL_STAT FAN OFF/FAN AUTO/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
  • FAN OFF: Blower motor is stopped
  • FAN AUTO: Blower motor is operating in auto control
  • Manual 1: Blower motor is operating in manual 1
  • Manual 2: Blower motor is operating in manual 2
  • Manual 3: Blower motor is operating in manual 3
  • Manual 4: Blower motor is operating in manual 4
  • Manual 5: Blower motor is operating in manual 5
  • Manual 6: Blower motor is operating in manual 6
  • Manual 7: Blower motor is operating in manual 7
-
FAN_DOWN_SW OFF/ON
  • OFF: Airflow volume control switch (-) is not pressed
  • ON: Airflow volume control switch (-) is pressed
-
FAN_UP_SW OFF/ON
  • OFF: Airflow volume control switch (+) is not pressed
  • ON: Airflow volume control switch (+) is pressed
-
GLOVE_BOX_LAMP_CTRL OFF/ON
NOTE:
  • Displays in the M-MDS but it does not operate.
-
HZRD_CTRL_STAT OFF/ON
  • OFF: Hazard system is not operating
  • ON: Hazard system is operating
-
HZRD_SW OFF/ON
  • OFF: Hazard warning switch is off
  • ON: Hazard warning switch is on
-
INTAKE_CTRL_STAT Auto/REC/FRESH
  • Auto: Air intake control setting is in AUTO
  • REC: Air intake control setting is in REC
  • FRESH: Air intake control setting is in FRESH
-
MODE_SW OFF/ON
  • OFF: MODE switch is off
  • ON: MODE switch is on
-
ON_OFF_SW OFF/ON
  • OFF: POWER switch is off
  • ON: POWER switch is on
-
R_DEF_CTRL_STAT OFF/ON
  • OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)
  • ON: Rear window defogger switch indicator is turned on (rear window defogger operating)
-
R_DEF_SW OFF/ON
  • OFF: Rear window defogger switch is off
  • ON: Rear window defogger switch is on
-
REC_SW OFF/ON
  • OFF: RECIRCULATE/FRESH switch is off
  • ON: RECIRCULATE/FRESH switch is on
-
SEAT_HEAT_STAT_L OFF/Lo/Mid/Hi/AUTO
  • OFF: Seat warmer switch (LH) indicator is turned off
  • Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1
  • Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2
  • Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3
  • AUTO: -
-
SEAT_HEAT_STAT_R OFF/Lo/Mid/Hi/AUTO
  • OFF: Seat warmer switch (RH) indicator is turned off
  • Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1
  • Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2
  • Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3
  • AUTO: -
-
SEAT_HEAT_SW_L OFF/ON
  • OFF: Seat warmer switch (LH) is off
  • ON: Seat warmer switch (LH) is on
-
SEAT_HEAT_SW_R OFF/ON
  • OFF: Seat warmer switch (RH) is off
  • ON: Seat warmer switch (RH) is on
-
STR_HEAT_STAT OFF/Lo
  • OFF: Steering warmer switch indicator is turned off
  • Lo: Steering warmer switch indicator is turned on
-
STR_HEAT_SW OFF/ON
  • OFF: Heated steering wheel switch is off
  • ON: Heated steering wheel switch is on
-
SYNC_SW OFF/ON
  • OFF: SYNC switch is off
  • ON: SYNC switch is on
-
TEMP_DOWN_SW_L OFF/ON
  • OFF: Temperature control dial (LH) is not rotated left
  • ON: Temperature control dial (LH) is rotated left
-
TEMP_DOWN_SW_R OFF/ON
  • OFF: Temperature control dial (RH) is not rotated left
  • ON: Temperature control dial (RH) is rotated left
-
TEMP_UP_SW_L OFF/ON
  • OFF: Temperature control dial (LH) is not rotated right
  • ON: Temperature control dial (LH) is rotated right
-
TEMP_UP_SW_R OFF/ON
  • OFF: Temperature control dial (RH) is not rotated right
  • ON: Temperature control dial (RH) is rotated right
-
VOLT_5V V Displays the voltage for the 5 V power supply of the circuit in the climate control unit. -
VPWR V Displays the power supply voltage (B+) to the climate control unit. -