LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Sunroof System) >> Sunroof Motor Removal/Installation

Sunroof Motor Removal/Installation

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION (US) .)
  3. Disconnect the connector.
    G13560489Courtesy of MAZDA MOTORS CORP.
  4. Remove the screws.
  5. Remove the sunroof motor.
  6. Install in the reverse order of removal.