Starter Does Not Work: Notes

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

STARTER DOES NOT WORK (EV6A-EL, EV6AX-EL) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item	Starter does not work
Description	Starter does not work even when in P or N position.
Possible cause	Wiring harness between TCM terminal J and PCM terminal 2BD malfunction Wiring harness between TCM terminal J and body control module (BCM) terminal 2U malfunction Engine control system malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable