CAN Topology
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- Verify the module displayed in red or blue on the M-MDS using the network view.
- Verify the applicable CAN BUS table and select the CAN BUS reference corresponding to the module displayed in red or blue on the M-MDS. (See CAN BUS TABLE .)NOTE:
- The module may be displayed in red or blue on the M-MDS screen even if there is no malfunction depending on the vehicle specification.