Rear Side Radar Sensor (RH)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

-: Not applicable

PID/DATA MONITOR DESCRIPTION - REAR SIDE RADAR SENSOR (RH)

PID	Unit/Operation	Data contents	Module control terminal
AIM_ANG_AUTO	° (deg)	Displays corrected angle by auto alignment function	-
AIM_ANG_M	° (deg)	Displays detection angle of rear side radar sensor (RH)	-
AIM_MODE	OFF/ON	OFF: Auto aiming setting for rear side radar sensor (RH) is off. ON: Auto aiming setting for rear side radar sensor (RH) is on.	-
AUTO_AIM_STAT	Non-Completion/Completion	Non-Completion: Auto alignment is not completed. Completion: Auto alignment is completed at least once.	-
BSM_WRNG	OFF/ON	OFF: Warning2 signal is not sent from rear side radar sensor (RH). ON: Warning2 signal is sent from rear side radar sensor (RH).	-
EMI_STAT	OFF/ON	OFF: Emission is off. ON: Emission is on.	-
FCTA_WRNG	OFF/ON	OFF: FCTA signal is not sent from rear side radar sensor (RH). ON: FCTA signal is sent from rear side radar sensor (RH).	-
RCTA_WRNG	OFF/ON	OFF: RCTA signal is not sent from rear side radar sensor (RH). ON: RCTA signal is sent from rear side radar sensor (RH).	-
SYS_STAT	OFF/ON	OFF: Front cross traffic alert (FCTA) system and rear cross traffic alert (RCTA) system is off. ON: Front cross traffic alert (FCTA) system and rear cross traffic alert (RCTA) system is on.	-
TGT_FLAG	detect/not detect	detect: Obstruction is detected. not detect: Obstruction is not detected.	-
VPWR	V	Displays rear side radar sensor (RH) power supply voltage	-