LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Fuel System (VIN M)) >> Fuel Draining Procedure >> Fuel Siphoning Procedure In Fuel Tank (AWD)

Fuel Siphoning Procedure In Fuel Tank (AWD)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION .)
  2. Siphon the fuel in the fuel tank (main).
  3. Perform the following procedure if the fuel gauge value before siphoning the fuel is 8/16 or more. If the fuel gauge value is less than 8/16, go to the next step.
    1. Insert the hose into the fuel tank (main).
    2. Direct the inserted hose into the fuel tank (sub).
    3. Siphon the fuel in the fuel tank (sub).

      Fuel siphoning amount (reference) 

      approx.5.0 Lor more

  4. Remove the fuel gauge sender unit. (See FUEL GAUGE SENDER UNIT REMOVAL/INSTALLATION (US) .)
  5. Siphon the fuel in the fuel tank (sub).
scientia non olet · About LEMON Manuals