LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Mechanical System (VIN M)) >> Engine Tune-Up >> Ignition Timing Inspection

Ignition Timing Inspection

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The ignition timing cannot be adjusted.
  • The M-MDS is required to verify the ignition timing.
  1. Prepare for the engine tune-up. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify the ignition timing (M-MDS PID: SPARKADV) using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)

    Ignition timing (MTX: Neutral position, ATX: P position or N position) 

    Approx. BTDC 12°

  3. Verify that ignition timing advances when the engine speed increases gradually.
scientia non olet · About LEMON Manuals