LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Mechanical System (VIN M)) >> Engine Tune-Up >> Idle Speed Inspection

Idle Speed Inspection

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The idle speed cannot be adjusted.
  • The M-MDS is required to verify the idle speed.
  1. Prepare for the engine tune-up. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify that the idle speed (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)
    • If there is a malfunction, refer to "SYMPTOM TROUBLESHOOTING - ENGINE ".

      Idle speed (MTX: Neutral position, ATX: P position or N position) 

      MTX: 560-660 rpm

      ATX: 550-650 rpm

scientia non olet · About LEMON Manuals