Us/CANADA Spec: Rear
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition off.
- Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
- Remove the rear buckle. (See REAR BUCKLE REMOVAL/INSTALLATION .)
- Inspect for continuity between the buckle switch terminals using a tester.
- If not as indicated in the table, replace the rear buckle.