Front (Driver-side buckle switch)
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition off.
- Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION (US) .)
- Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION (US) .)
- Inspect for continuity between the buckle switch terminals using a tester.
- If not as indicated in the table, replace the front buckle.