Connected Vehicle Maintenance Mode

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

The connected vehicle maintenance mode is for restricting the functions of the MyMazda App. Switching to connected vehicle maintenance mode prevents the customer from being notified of the vehicle condition while it is being serviced or the customer making a remote operation (such as engine starting) while the vehicle is being serviced.
Switch to connected vehicle maintenance mode before servicing according to the following table.
When returning the vehicle to the customer, always verify that connected vehicle maintenance mode was canceled.

Overhaul servicing⁽¹⁾

No overhaul servicing⁽¹⁾

Repeatability test

Servicing while customer is waiting

Switch to connected vehicle maintenance mode

No switch to connected vehicle maintenance mode⁽²⁾

Switch to connected vehicle maintenance mode

Servicing after vehicle is received

Switch to connected vehicle maintenance mode

⁽¹⁾	Such as servicing required for disconnecting part connector

⁽²⁾	If the system is not switched to connected vehicle maintenance mode, explain to the customer that they may receive various notifications during the servicing.