LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (General Information) >> Service Cautions (Us) >> AWD inspection/service >> Wheel balancer (on the vehicle balancer)

Wheel balancer (on the vehicle balancer)

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Jack up all four wheels.
  2. Support the wheels (front or rear) on the side to be measured (near the wheels) using a wheel balancer sensor stand.
  3. Support the wheels on the side not to be measured (near the wheels) using safety stands.
    G11433443Courtesy of MAZDA MOTORS CORP.
  4. Set up the wheel balancer and rotate the wheels using engine drive to measure the wheel balance.
scientia non olet · About LEMON Manuals