Wiring Harness
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- To remove the wiring harness from the clip in the engine room, pry up the hook of the clip using a flathead screwdriver.
 Courtesy of MAZDA MOTORS CORP.
|
CAUTION:
- Do not remove the wiring harness protective tape. Otherwise, the wires could rub against the body, which could result in water penetration and electrical shorting.
 Courtesy of MAZDA MOTORS CORP.
|