LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Dynamic Stability Control (Service Information)) >> Front Abs Wheel-Speed Sensor Inspection >> Clearance Inspection >> Servicing after inspection

Servicing after inspection

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front ABS wheel-speed sensor from the wheel hub, steering knuckle component.
  2. Install the wheel hub, steering knuckle component. (See WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION (US) .)
  3. Install the front ABS wheel-speed sensor. (See FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION (US) .)
  4. Inspect the front wheel alignment. (See FRONT WHEEL ALIGNMENT (US) .)
scientia non olet · About LEMON Manuals