LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Dynamic Stability Control (Service Information)) >> DSC HU/Cm Removal/Installation [L.H.D. (Us)] >> Nuts Installation Note

Nuts Installation Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten nut A to the specified torque.
    G13558401Courtesy of MAZDA MOTORS CORP.
  2. Tighten nut B to the specified torque.
scientia non olet · About LEMON Manuals