LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (On-Board Diagnostic - MAZDA Connect (1 Of 5)) >> Diagnostic Assist Function [Connectivity Master Unit (Us)] >> Ending Procedure

Ending Procedure

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Select [End Diag Mode] on the diagnostic assist function initial screen and wait for 10 s or more.
  2. The diagnostic assist function ends and the center display initial screen launches.
scientia non olet · About LEMON Manuals