LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (On-Board Diagnostic - MAZDA Connect (1 Of 5)) >> Diagnostic Assist Function [Connectivity Master Unit (Us)] >> Diagnostic Test Menu >> Settings/programmed information initialization

Settings/programmed information initialization

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
  2. Select in the following order from the diagnostic assist function initial screen.
    1. [Diagnostic Test]
    2. [System Self-Diagnostic Test]
    3. [Settings/Registered Information Initialization]
  3. Perform initialization for each type of setting and programmed information according to the directions on the screen.
  4. The diagnostic assist function ends and the center display initial screen launches.
scientia non olet · About LEMON Manuals