Driver-side Air Bag Module/Passenger-side Air Bag Module: Handling

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

Before removing the air bag module or disconnecting the air bag module connector, always switch the ignition off, disconnect the negative battery terminal, and then wait for 1 min or more to allow the backup power supply of the SAS control module to deplete its stored power.

Courtesy of MAZDA MOTORS CORP.
A live (undeployed) air bag module placed with its deployment surface to the ground is dangerous. If the air bag module were to accidentally operate (deploy), it could cause serious injury. Always place a live (undeployed) air bag module with its deployment surface up.