Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures (Us/CANADA): Notes

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Never dispose of an air bag module or pre-tensioner seat belt that has not been operated (deployed). Otherwise, they may accidently operate (deploy) and cause serious injury.

CAUTION:

When disposing of any air bag modules or pre-tensioner seat belts, activate (deploy) them by following the deployment procedures below.
To dispose of an activated (deployed) air bag module or pre-tensioner seat belt, refer to [AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DISPOSAL PROCEDURES]. (See AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DISPOSAL PROCEDURES (US/CANADA) .)

NOTE:

The air bag module, the pre-tensioner seat belt, and the connector part of the processing wiring harness are melted by high heat when the inflator is activated (deployed).