Past malfunction

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

Malfunction detected by past drive cycle, but with current drive cycle, status is determined as normal
- DTCs can be read out by implementing a quick check or an on-demand self-test using the M-MDS. (See DTC INSPECTION .)
- Status byte can be read out by implementing a quick check using the M-MDS. (See DTC INSPECTION .)
- For details on the status byte, verify the explanation displayed on the M-MDS screen when reading out DTCs.