LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Transfer Case) >> Transfer Oil Seal Replacement [EV6AX-El] >> Transfer Oil Seal (RH) No. 3 >> Removal

Transfer Oil Seal (RH) No. 3: Removal

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front drive shaft (RH). (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION (US) .)
  2. Remove the transfer oil seal (RH) No. 1. (See TRANSFER OIL SEAL (RH) NO. 1 .)
  3. Remove the transfer oil seal (RH) No. 3 using a tape-wrapped flathead screwdriver.
G13558184Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals