LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Drive Axle Shaft) >> Rear Drive Shaft Disassembly/Assembly >> Boot (Wheel Side) Disassembly Note

Boot (Wheel Side) Disassembly Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wrap vinyl tape around the spline area of the shaft to prevent damage to the boot.
    G13558003Courtesy of MAZDA MOTORS CORP.
  2. Remove the boot (wheel side).
  3. Wipe off grease on the boot (wheel side) and ball joint using a clean cloth.
scientia non olet · About LEMON Manuals