LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Drive Axle Shaft) >> Rear Drive Shaft Disassembly/Assembly >> Boot (Differential Side) Disassembly Note

Boot (Differential Side) Disassembly Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wrap vinyl tape around the spline area of the shaft to prevent damage to the boot.
    G13558002Courtesy of MAZDA MOTORS CORP.
  2. Remove the boot (differential side).
  3. Wipe off grease on the boot (differential side) using a clean cloth.
scientia non olet · About LEMON Manuals