LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Front Suspension System) >> Front Lower Arm Removal/Installation (Us) >> Suspension Links Installation Note

Suspension Links Installation Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing the joint section with a rubber bushing, perform the following steps.
    1. Temporarily tighten the bolt with the vehicle lifted up.
    2. Lower the vehicle to the ground and tighten the bolt to the specified torque.
scientia non olet · About LEMON Manuals