Part Inspection
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the battery is fully charged. (See BATTERY INSPECTION (US) .)
- Disconnect the cooling fan motor connector (3 terminals).
- Install a tester and battery to the cooling fan motor connector (3 terminals) as shown in the illustration.
- Verify that each cooling fan motor operates smoothly at the standard current.
- If there is any malfunction, replace the applicable part.
Cooling fan motor standard current
9.5-11.5 A [12 V]
- If there is any malfunction, replace the applicable part.