Air Intake Mode Does Not Change (Manual A/C): Notes

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

AIR INTAKE MODE DOES NOT CHANGE (MANUAL A/C) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item	Air intake mode does not change
Description	Air intake mode does not change when switching REC/FRESH mode No change in wind noise when airflow volume is set to 3 or more even if REC/FRESH switch is operated
Possible cause	Dash-electrical supply unit detects DTC Detects DTC and activates fail-safe Air intake link malfunction Lack of grease Bad installation Air intake actuator malfunction Air intake door malfunction Bad installation Damage

When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while performing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, inspect to make sure connectors, terminals and wiring harnesses are connected correctly and undamaged.