LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (On-Board Diagnostic - Engine Control System (3 Of 4)) >> DTC P2226-00: BARO Sensor Range/Performance Problem >> Details On DTCs

Details On DTCs

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
DTC P2226:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

Description BARO sensor range/performance problem
Detection condition Determination conditions
  • Communication error between BARO sensor and PCM
  • Non-volatile memory error in BARO sensor
Preconditions
  • Battery voltage: 10.5-16 V*1

*1 : Standard can be verified by displaying PIDs using M-MDS
Malfunction determination period
  • 5 s period
Drive cycle
  • 1
Self test type
  • CMDTC self test, KOEO self test, KOER self test
Sensor used
  • BARO sensor (built-into PCM)
Fail-safe function
  • Fixes the barometric pressure for the engine control at 101.32 kPa {1.0332 kgf/cm2 , 14.695 psi}.
Vehicle status when DTCs are output
  • Not applicable
Possible cause
  • BARO sensor (built-into PCM) malfunction
  • PCM malfunction