LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Security And Locks) >> Rear Door Latch And Lock Actuator Removal/Installation >> Service Hole Cover Installation Note

Service Hole Cover Installation Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing the service hole cover, verify that the seal rubber is not wet.
    G13560427Courtesy of MAZDA MOTORS CORP.
  2. If the seal rubber or a tab is damaged, replace the service hole cover.