DTC B200A-62: Liftgate Open/Close Signal Malfunction (BCM): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC B200A:62 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Liftgate open/close signal malfunction
Detection condition	The body control module (BCM) detects that the power liftgate (PLG) control module signal and the liftgate open/close are incompatible.
Fail-safe	Not applicable
Possible cause	The body control module (BCM) was replaced with the liftgate closed. A power liftgate (PLG) control module from another vehicle is installed. Power liftgate (PLG) control module malfunction Body control module (BCM) malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable