LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (On-Board Diagnostic - Body Control Module (BCM) (2 Of 3)) >> DTC B2004-56: Active Driving Display (Add) Configuration Error (BCM) >> Outline

DTC B2004-56: Active Driving Display (Add) Configuration Error (BCM): Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
DTC B2004:56 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Active Driving Display (ADD) configuration error
Detection condition
  • The Active Driving Display (ADD) configuration error (incorrect value write) detected.
Fail-safe Not applicable
Possible cause
  • Active Driving Display (ADD) configuration error
  • Active Driving Display (ADD) malfunction
  • Body control module (BCM) malfunction
System wiring diagram Not applicable
Connector diagram Not applicable
scientia non olet · About LEMON Manuals