DTC B1456-62: Latch Condition Malfunction (BCM): Outline
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
DTC B1456:62 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Latch condition malfunction |
| Detection condition |
- The power liftgate (PLG) control module detects that the room light switch is off and half latch switch is on for 1 s or more.
|
| Fail-safe |
- Stops the power liftgate (PLG) system operation.
|
| Possible cause |
- Liftgate latch and lock actuator connector or terminal malfunction
- Open circuit in liftgate latch and lock actuator ground circuit
- Power liftgate (PLG) control module connector or terminal malfunction
- Short to ground in liftgate latch and lock actuator signal circuit
- Short to power supply in liftgate latch and lock actuator signal circuit
- Open circuit in liftgate latch and lock actuator signal circuit
- Liftgate latch and lock actuator malfunction
- Power liftgate (PLG) control module malfunction
- Body control module (BCM) malfunction
|
Courtesy of MAZDA MOTORS CORP.
|