LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transaxle System (Service Information) (EV6A-El, EV6AX-El)) >> Initial Learning >> Initial Learning Procedure >> Preparation before servicing

Preparation before servicing

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify initial learning implementation necessity for replacement parts.
    Replacement part Initial learning implementation necessity
    Control valve body replacement Necessary
    Oil pressure switch replacement Necessary
    Clutches (1) Necessary
    Automatic transaxle replacement Necessary
    ON/OFF solenoid replacement Unnecessary
    Coupler component replacement Unnecessary
    (1) Low clutch, high clutch, R-3-5 brake, 2-6 brake, and low and reverse brake
  2. Apply/the parking brake firmly, and set the wheel blocks for both the front and rear wheels.
  3. Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION .)
scientia non olet · About LEMON Manuals